News Releases By Date
EPA Issues Pollution Permitting Guidance for States/Focus is on improving energy efficiency to reduce GHG pollution from the largest industrial facilities
Release Date: 11/10/2010
Contact Information: Cathy Milbourn Milbourn.firstname.lastname@example.org 202-564-7849 202-564-4355 Enesta Jones Jones.email@example.com 202-564-7873 202-564-4355
WASHINGTON – The U.S. Environmental Protection Agency (EPA) is making available guidance and tools to help state and local air permitting authorities identify cost-effective pollution reduction options for greenhouse gases (GHGs) under the Clean Air Act. These tools are part of EPA’s common sense approach to GHG permitting of the largest emissions sources outlined this spring in the tailoring rule. GHG pollution threatens the health and welfare of all Americans, and contributes to climate change.
“‘EPA is working closely with its partners at the state and local levels to ensure permitting for greenhouse gases runs smoothly,”‘ said Gina McCarthy, assistant administrator for EPA’s Office Air and Radiation. “‘To identify GHG reduction options, EPA and the states are now ready to apply the same time-tested process they have used for other pollutants. This shows that the Clean Air Act can be used to reduce these gases in a cost effective way.”‘
EPA recommends that permitting authorities use the best available control technology (BACT) process to look at all available emission reduction options for GHGs. After taking into account technical feasibility, cost and other economic, environmental and energy considerations, permitting authorities should narrow the options and select the best one. EPA anticipates that, in most cases, this process will show that the most cost effective way for industry to reduce GHG emissions will be through energy efficiency.
The guidance does not define or require a specific control option for a particular type of source because BACT is determined on a case-by-case basis. Instead, the guidance and resources provide the basic information that permit writers and applicants need to address GHGs. The guidance also provides examples of how permitting requirements could apply.
In January 2011, industries that are large emitters of GHGs, and are planning to build new facilities or make major modifications to existing ones, will work with permitting authorities to identify and implement BACT to minimize their GHGs. This includes the nation’s largest GHG emitters, such as power plants, refineries and cement production facilities. Emissions from small sources, such as farms and restaurants are not covered by these GHG permitting requirements.
EPA welcomes public feedback on the guidance over the next few weeks on any aspect that contains technical or calculation errors or where the guidance would benefit from additional clarity.
Information on EPA’s guidance: http://www.epa.gov/nsr/ghgpermitting.html