Pacific Southwest, Region 9: Superfund
Serving Arizona, California, Hawaii, Nevada, the Pacific Islands, and Tribal Nations
Industrial Waste Processing
EPA #: CAD980736284
Congressional District: 19
On this page
Description and History
NPL Listing History
NPL Status: Final
Proposed Date: 10/26/89
Final Date: 08/30/90
The 1/2-acre Industrial Waste Processing site was a recycling facility from 1967 to 1981. The facility reclaimed glycols [ethylene glycol; a related alcohol containing two hydroxyl groups] from petroleum residues recovered from natural gas field pipelines and non-chlorinated solvents generated by the paint and ink industries. The facility also recovered lead solder and zinc from waste solder flux [fluid] generated by the metal can manufacturing industry. The site consisted of an office/laboratory building, an open chemical storage shed, eight aboveground tanks, solvent distillation stills, approximately 250 drums containing waste solvents and lead solder flux, approximately 50 cubic yards of lead solder waste stored in two piles, and about 50 bags and 30 drums of asbestos. The closest residence is located 40 feet from the site perimeter. The surrounding population within a 3 mile radius of the site is approximately 68,000. An estimated 348,000 people depend on the groundwater for drinking water. There are 119 wells located within 3 miles of the site.
Contaminants and Risks
- Soil and Sludges
Lead, asbestos, acetone and other solvents have been found in the soil. Potential health threats may exist if contaminated vapors or particles are inhaled. People also may be at risk from accidentally ingesting or coming into direct contact with contaminated groundwater or soil.
Who is Involved
This site is being addressed through Federal and potentially responsible parties' actions.
Investigation and Cleanup Activities
This site is being addressed in two stages: immediate actions and a long-term remedial phase focusing on cleanup of the entire site.
Immediate Actions: In 1988, the EPA removed all asbestos found in bags, drums and building insulation, and all lead solder wastes in drums and piles; secured the site from unauthorized access; developed site safety plans; implemented dust suppression actions; monitored for fugitive vapors and dusts; and removed 19,000 gallons of hazardous liquids and 290 cubic yards of contaminated soil.
Entire Site: In 1992, potentially responsible parties, under EPA oversight, began an investigation into the nature and extent of residual soil contamination at the site. The investigation, which was completed in the fall of 1993, identified soil contaminants. An Engineering Evaluation/Cost Analysis Report completed in 1995 evaluated alternatives for the final cleanup. An Action Memorandum for a removal action for the Soils Operable Unit was signed in October 1995. The cleanup, to be performed by potentially responsible parties, will consist of removal of surface soils contaminated with lead and solvents and natural attenuation of solvents in subsurface soils.
A Consent Decree was lodged in April 1996, under which four IWP potentially responsible parties (PRPs) agreed to conduct a non-time critical removal action for lead and TCE in soil. The removal action took place during July of 1998. The action consisted of the excavation, disposal, and backfill of the top foot of soil on the site including some soil around the site. The lead cleanup standard for the action is 400mg/kg - parts per million (ppm). The cleanup standard for TCE is 7mg/kg -ppm. Approximately 2,352 tons of material was excavated from the Site. A remedial investigation for the groundwater was completed in May of 1999.
Vapor samples were collected in 2006 in the commercial building located on site. The risks related to vapor exceeded EPA's indoor air industrial screening levels. Vapor intrusion was mitigated by sealing around plumbing fixtures and plugging an open monitoring well inside the building. Follow-up indoor air samples were collected and analyzed in 2009. The results indicated that while indoor air industrial screening levels were not exceeded, residential use screening levels were still exceeded. Results are posted in the Second Five Year Review Report in the Documents and Reports section below. Recommendations for further action include determining whether the residual PCE in indoor air is originating from soil contamination or from ongoing commercial activities. Depending on the outcome of this determination, further remedial actions may be taken, which could include a land use covenant to restrict residential use.
Cleanup Results to Date
Restricting site access, removing asbestos, lead solder waste, hazardous liquids, and contaminated soil, and performing the dust suppression actions described above, have reduced the potential threat of direct contact with contaminants in the soil at the Industrial Waste Processing site. Sealing around plumbing fixtures and plugging an open well has reduced vapor intrusion, so that indoor air quality is currently acceptable for industrial or commercial uses.
Potentially Responsible Parties
Potentially responsible parties (PRPs) refers to companies that are potentially responsible for generating, transporting, or disposing of the hazardous waste found at the site.
Online information about the PRPs for the site is not yet available.
Documents and Reports
Public Information Repositories
The public information repositories for the site are at the following locations:
Fresno County Library,
2420 Mariposa Street,
Fresno, CA 93721
EPA Site Manager
Mail Code SFD
75 Hawthorne Street
San Francisco, CA 94105
EPA Community Involvement Coordinator
Mail Code SFD
75 Hawthorne Street
San Francisco, CA 94105
EPA Public Information Center
8800 Cal Center Drive
After Hours (Emergency Response)