SIP - ALASKA - 18 AAC 50.055 | Region 10 | US EPA

Jump to main content.


SIP - ALASKA - 18 AAC 50.055

118 AAC 50.055. INDUSTRIAL PROCESSES AND FUEL-BURNING EQUIPMENT

(a) Visible emissions, excluding condensed water vapor, from an industrial pro­cess or fuel-burning equipment may not reduce visi­bility through the exhaust effluent by
(b) Particulate matter emitted from an industrial pro­cess or fuel-burning equipment may not exceed, per cubic foot of exhaust gas corrected to standard condi­tions and averaged over three hours, (c) Sulfur-compound emissions, expressed as sulfur dioxide, from an industrial process or from fuel-burning equipment may not exceed 500 ppm averaged over a peri­od of three hours, except as provided in (d) - (f) of this sec­tion and 18 AAC 50.060.

(d) At a petroleum refinery, emissions from the following sources, constructed or modified after November 1, 1982, may not exceed the following: (e) At a coal preparation plant, emissions from the following sources, if constructed or modified after November 1, 1982, may not exceed the following: (f) At a portland cement plant, emissions from the following sources, if constructed or modified after November 1, 1982, may not exceed the following: (g) Release of materials other than process emissions, products of combustion, or materials introduced to control pollutant emissions from a stack at a stationary source constructed or modified after November 1, 1982, is prohibited, except as authorized by a construction permit, Title V permit, or air quality control permit issued before October 1, 2004.

State effective: 10/1/04; EPA effective: 9/13/07


Local Navigation


URL: http://yosemite.epa.gov/r10/airpage.nsf/SIPs\SIPs/ALASKA/SIPAlaska50.055

Jump to main content.