Jump to main content or area navigation.

Contact Us

Regulatory Development and Retrospective Review Tracker

National Emission Standards for Hazardous Air Pollutants (NESHAP): Brick and Structural Clay Products Manufacturing and Clay Ceramics Manufacturing

a.k.a. NESHAP MACT for Brick and Structural Clay and Clay Ceramics


RIN: 2060-AP69 (What's this?)

Docket No.: Not yet available (What's this?)

Current Phase: Pre-Proposal (What's this?)

Abstract:
This rulemaking will establish emission limits for hazardous air pollutants (hydrogen flouride (HF), hydrogen chloride (HCl) and metals) emitted from brick and clay ceramics kilns, as well as dryers and glazing operations at clay ceramics production facilities.

The brick and structural clay products industry primarily includes facilities that manufacture brick, clay, pipe, roof tile, extruded floor and wall tile, and other extruded dimensional clay products from clay, shale, or a combination of the two. The manufacturing of brick and structural clay products involves mining, raw material processing (crushing, grinding, and screening), mixing, forming, cutting or shaping, drying, and firing. Ceramics are defined as a class of inorganic, nonmetallic solids that are subject to high temperature in manufacture and/or use. The clay ceramics manufacturing source category includes facilities that manufacture traditional ceramics, which include ceramic tile, dinnerware, sanitary ware, pottery, and porcelain. The primary raw material used in the manufacture of these traditional ceramics is clay. The manufacturing of clay ceramics involves raw material processing (crushing, grinding, and screening), mixing, forming, shaping, drying, glazing, and firing.
Timeline

MilestoneDate
Initiated06/11/2009
NPRM: Sent to OMB for Regulatory Review06/13/2010
NPRM: Regulatory Review Concluded06/13/2010
NPRM: Received by OMB06/13/2010
NPRM: Published in FR09/2014 (projected)

Potential Effects

Small Entities
EPA notifies the public when a rulemaking is likely to 1) have any adverse economic impact on small entities even though a Regulatory Flexibility Analysis may not be required and/or 2) have significant adverse economic impacts on a substantial number of small entities. The term "small entities" includes small businesses, small governments, and small not-for-profits. (Read a longer explanation on our Small Entities web page.) This rulemaking is likely to impact small entities in the following way(s):

  • Likely to have any adverse economic impact on:
    • small businesses
  • Likely to have a significant adverse economic impact on a substantial number of these small entities:
    • small businesses

Participate / Learn More Regulatory Review

Some of EPA's rulemakings undergo regulatory review (What's this?), as prescribed by Executive Order 12866 and coordinated by the Office of Management and Budget (OMB). The following list describes which of this rulemaking's stages have completed review and published in the Federal Register, if any, and provides links to the review documents where available. Consult the "Timeline" section of this Web page for the dates of each review.

  • NPRM - This stage of the rulemaking underwent review.
Citations & Authorities

Code of Federal Regulations (CFR) Citation
Not Yet Determined

Legal Authority
Clean Air Act

Disclaimer

This site provides summaries of priority rulemakings and priority retrospective reviews of existing regulations. We update most of the site at the beginning of each month, though some data is updated more frequently if it is time sensitive. The information on this site is not intended to and does not commit EPA to specific conclusions or actions. For example, after further analysis, EPA may decide the effects of a rule would be different or it may decide to terminate a rulemaking.


Jump to main content.