News Releases from Headquarters
First WaterSense Labeled Product Available for Commercial Kitchens / Pre-rinse spray valves will help restaurants save water, energy, and money
Release Date: 09/19/2013
Contact Information: Dale Kemery 202-564-7839 202-564-4355 firstname.lastname@example.org
WASHINGTON, DC - The U.S. Environmental Protection Agency (EPA) has finalized the first WaterSense specification for a commercial kitchen product. EPA estimates that approximately 51 billion gallons of water is used every year to rinse dishes by close to 1 million food service establishments in the country. Pre-rinse spray valves—which remove excess food waste from dishes prior to dishwashing—are now eligible to earn the WaterSense label and help food service establishments save water, energy, and money.
If every U.S. commercial food service establishment installed and used a WaterSense labeled pre-rinse spray valve, we could save more than 10 billion gallons of water, more than $225 million in water and energy costs and prevent the equivalent of 900,000 tons of carbon dioxide emissions – equal to the emissions from 187,500 passenger vehicles – annually across the country.
Like all WaterSense labeled products, pre-rinse spray valves that earn the label must be independently certified for efficiency and performance. Working in conjunction with industry stakeholders, EPA specifies a maximum flow rate for WaterSense labeled pre-rinse spray valves of 1.28 gallons per minute, 20 percent less water than the federal standard. To ensure that these fixtures will work well and meet the demands of high-volume kitchens while using less water, EPA also includes spray force performance criteria and a requirement for life cycle testing for the products to earn the WaterSense label.
“Pre-rinse spray valves can account for nearly one-third of the water used in a typical commercial kitchen,” said EPA Acting Administrator for Water Nancy Stoner. “Replacing just one of these fixtures with a WaterSense labeled model can save a typical restaurant more than 7,000 gallons of water per year, the amount of water needed to wash nearly 5,000 racks of dishes.”
Restaurants and commercial kitchens are one of the highest energy consumers in commercial buildings, using approximately five to eight times more energy per square foot than other commercial spaces. Outfitting a kitchen with WaterSense labeled pre-rinse spray valves, along with ENERGY STAR certified food service products, will save energy and water.
A restaurant that replaces just one pre-rinse spray valve with a WaterSense labeled model could recoup its investment in four to eight months and save more than $115 per year on water and energy costs, depending on how its water is heated. WaterSense labeled pre-rinse spray valves will be promoted by EPA’s ENERGY STAR program as part of a suite of energy saving products and practices for the restaurant industry.
To develop the specification, WaterSense worked with a project team associated with the American Society of Mechanical Engineers (ASME)/Canadian Standards Association (CSA) to evaluate pre-rinse spray valve performance and develop a meaningful test protocol. The ASME/CSA project team was open to the public and comprised a wide variety of stakeholders, including manufacturers, utilities, testing laboratories, representatives from ASTM International, and other water efficiency experts.
WaterSense, a partnership program sponsored by EPA, seeks to protect the future of our nation's water supply by offering people a simple way to use less water with water-efficient products, new homes, and services. Since the program's inception in 2006, WaterSense has helped consumers save 487 billion gallons of water and $8.9 billion in water and energy bills. For more information, visit www.epa.gov/watersense