| Title | | Status |
|---|
 d-Penothrin (Sumithrin): Acute and Chronic Dietary and Drinking Water Exposure and Risk Assessment for the Reregistration Eligibility Decision (RED) and Petition and Associated Section 3 Registration Action. (2008) | | Not Reported |
| d-Phenothrin (Sumithrin): Occupational and Residential Exposure Assessment for the Reregistration Eligibility Decision (RED). (2007) | | Not Reported |
| Daminozide Position Document 2/3. Preliminary Determination To Cancel Certain Daminozide Product Registrations; Availability Of Technical Support Document And Draft Notice Of Intent To Cancel, Federal Register May 24, 1989. (1989) | | Proposed |
| Daminozide, Position Document 4. (1989) | | Final |
| Daminozide: Notice Of Final Determination For Non-Food Uses And Termination Of The Daminozide Special Review, Final Determination And Termination Of Special Review (PD4), Federal Register October 8, 1992. (1992) | | Final |
| Daminozide: Technical Support Document. Special Review Preliminary Determination To Cancel The Food Uses Of Daminozide. (1989) | | Final |
| Dazomet: Revised HED Human Health Risk Assessment for Phase 3. (2005) | | Not Reported |
| DBP Control In Drinking Water: Cost And Performance. (1994 ) | | Not Reported |
| DDT: A Review Of Scientific And Economic Aspects Of The Decision To Ban Its Use As A Pesticide. (See OPPT Headquarters Library Copy #540/1-75-022). (1975) | | Not Reported |
| Debottlenecking, Aggregation and Project Netting Proposed Rule, Qualitative Environmental Analysis. (2006) | | Not Reported |
| Defenacoum: Human Health Risk Assessment for Proposed Uses on Commensal Rodents. (2007) | | Not Reported |
| Delopment Document for Interim Final and Proposed Effluent Limitations and Proposed Effluent Limitations Guidelines and New Source Performance Standards for the Ore Mining and Dressing Industry Point Source Category, Volumes 1 and 2. (1975) | | Not Reported |
| Description Of Analysis Conducted To Estimate Impacts Of Benzene Emissions From Stage 1 Gasoline Marketing Sources. (1989) | | Not Reported |
| Desmedeipham: Human Health Risk Assessment. (2007) | | Not Reported |
| Desmedipham: Acute and Chronic Aggregate Dietary Exposure Assessment for the Tolerance Reassessment Eligibility Decision on Sugar Beets and Garden Beets and Risk Assessment for New Uses on Spinach. (2007) | | Not Reported |
| Desmedipham: Acute and Chronic Dietary Exposure Assessments for the Tolerance Reassessment Eligibility Decision. (2004) | | Not Reported |
| Desmedipham: HED Risk Assessment for the Tolerance Reassessment Eligibility Decision (TRED) Document. (2004) | | Not Reported |
| Detailed Cost Model Results For The: Addendum To The: Assessment Of The Potential Costs, Benefits, And Other Impacts Of The Hazardous Waste Combustion MACT Standards, Final Rule. (1999) | | Final |
| Detailed Costing Document For The Centralized Waste Treatment Industry. (1998) |  | Not Reported |
| Detailed Costing Document For The Centralized Waste Treatment Industry. (1995) | | Not Reported |
| Detailed Costing Document For The Final Effluent Limitations Guidelines And Standards For The Centralized Waste Treatment Industry. (2000) |  | Final |
| Detailed Costing Document for the Final Effluent Limitations Guidelines and Standards for the Meat and Poultry Products Point Source Category. (2004) | | Not Reported |
| Detailed Costing Document for the Final Effluent Limitations Guidelines and Standards for the Meat and Poultry Products Point Source Category. (2004) | | Not Reported |
| Develoment Document for Effluent Limitations Guidelines and Standards for the Electrical and Electronic Components Point Source Category, Phase II, Final. (1984) | | Final |
| Development Document for Advanced Notice of Proposed Rule Making for Effluent Limitations Guidelines and New Source Performance Standards for the Hot Forming and Cold Finishing Segment of the Iron and Steel Manufacturing Point Source Category. (1975) | | Draft |
| Development Document For Best Available Technology, Pretreatment Technology And New Source Performance Technology For The Pesticide Formulating, Packaging, And Repackaging Industry, Proposed. (1994) | | Proposed |
| Development Document For Best Available Technology, Pretreatment Technology, And New Source Performance Technology For The Pesticide Chemical Industry, Proposed. (See U.S. EPA Headquarters Library Copy #PB92-173541). (1992) | | Proposed |
| Development Document for Best Available Technology, Pretreatment Technology, and New Source Performance Technology for the Pesticide Formulating, Packagiing, and Repackaging Industry, Proposed. (1994) | | Proposed |
| Development Document for Best Conventional Pollutant Control Technology Effluent Limitations Guidelines for the Pulp, Paper and Paperboard and the Builders' Paper and Board Mills Point Source Categories. (1986) | | Not Reported |
| Development Document For Best Technology Available For The Location, Design, Construction And Capacity Of Cooling Water Intake Structures For Minimizing Adverse Environmental Impact, Final. (1976) | | Final |
| Development Document For Effluent Limitation Guidelines And Standards For The Offshore Subcategory Of The Oil And Gas Extraction Point Source Category. (See U.S. EPA Headquarters Library Copy No. 440/1-91/055). (1991 ) | | Proposed |
| Development Document For Effluent Limitation Guidelines And Standards For The Ore Mining And Dressing Point Source Category, Proposed. (1982) | | Proposed |
| Development Document for Effluent Limitations Guideines for the Pesticide Chemicals Manufacturing Point Source Category, Final Report.. (1978) | | Final |
| Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Fish Meal, Salmon, Bottom Fish, Clam, Oyster, Sardine, Scallop, Herring, and Abalone Segment of the Canned and Preserved Fish and Seafood Processing Industry Point Source Category, Final. (1975) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Animal Feed, Breakfast Cereal, and Wheat Starch Segment of the Grain Mills Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Apple, Citrus and Potato Processing Segment of the Canned and Preserved Fruits and Vegetables Point Source Category, Final. (See U.S. EPA Headquarters Library Copy #PB238-649). (1974) | | Final |
| Development Document For Effluent Limitations Guidelines And New Source Performance Standards For The Basic Fertilizer Chemicals Segment Of The Fertilizer Manufacturing Point Source Category, Final. (1974) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Bauxite Refining Subcategory of the Aluminum Segment of the Nonferrous Metals Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Builders Paper and Roofing Felt Segment of the Builders Paper and Board Mills Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Cane Sugar Refining Segment of the Sugar Processing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Catfish, Crab, Shrimp, and Tuna Segment of the Canned and Preserved Seafood Processing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Cement Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Copper, Nickel, Chromium, and Zinc Segment of the Electroplating Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Dairy Product Processing Point Source Category, Final. (1974) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Fabricated and Reclaimed Rubber Segment of the Rubber Processing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Feedlots Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Flat Glass Segment of the Glass Manufacturing Point Source Category. (1974) | | Proposed |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Flat Glass Segment of the Glass Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Formulated Fertilizer Segment of the Fertilizer Manufacturing Point Source Category. (1975) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Grain Processing Segment of the Grain Mills Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Isulation Fiberglass Manufacturing Segment of the Glass Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Leather Tanning and Finishing Point Source Category. (See U.S. EPA Headquarters Library Copy #PB95-122412). (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Major Inorganic Products Segment of the Inorganic Chemicals Manufacturing Point Source Category, Final Report. (1974) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Major Organic Products Segment of the Organic Chemicals Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Major Organic Products Segment of the Organic Chemicals Manufacturing Point Source Category. (1979) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Mineral Mining and Processing Point Source Category, Final Report. (1979) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Mineral Mining and Processing Point Source Category. (1979) | | Final |
| Development Document For Effluent Limitations Guidelines And New Source Performance Standards For The Offshore Subcategory Of The Oil And Gas Extraction Point Source Category, Final. (1993) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Oil Base Solvent Wash Subcategories of the Paint Formulating and the Ink Formulating Point Source Category. (1975) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Oil Base Solvent Wash Subcategories of the Paint Formulating and the Ink Formulating Point Source Category. (1975) | | Not Reported |
| Development Document For Effluent Limitations Guidelines And New Source Performance Standards For The Ore Mining And Dressing Point Source Category--Gold Placer Mining Subcategory, Final Report. (1988) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Paving and Roofing Materials (Tars and Asphalt) Point Source Category. (1975) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Petroleum Refining Point Source Category. (1974) | | Not Reported |
| Development Document For Effluent Limitations Guidelines And New Source Performance Standards For The Phosphorus Derived Chemicals Segment Of The Phosphate Manufacturing Point Source Category. (See U.S. EPA Headquarters Library Copy #PB241-018). (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Plywood, Hardboard, and Wood Preserving Segment of the Timber Products Processing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Pressed and Blown Glass Segment of the Glass Manufacturing Point Source Category. (1975) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Primary Aluminum Smelting Subcategory of the Aluminum Segment of the Nonferrous Metals Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Red Meat Processing Segments of the Meat Products and Rendering Processing Point Source Category, Final. Headquarters. (1974) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Secondary Aluminum Smelting Subcategory of the Aluminum Segment of the Nonferrous Metals Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document For Effluent Limitations Guidelines And New Source Performance Standards For The Smelting And Slag Processing Segments Of The Ferroalloy Manufacturing Point Source Category, Final. (1974) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Soap and Detergent Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Steam Electric Power Generating Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Steel Making Segment of the Iron and Steel Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document For Effluent Limitations Guidelines And New Source Performance Standards For The Synthetic Polymer Segment Of The Plastics And Synthetic Materials Manufacturing Point Source Category. (1975) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Synthetic Polymers Segment of the Plastics and Synthetic Materials Manufacturing Point Source Category. (1975) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Synthetic Resins Segment of the Plastics and Synthetic Materials Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document For Effluent Limitations Guidelines And New Source Performance Standards For The Textile Mills Point Source Category. (1974) | | Final |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Textile, Friction Materials and Sealing Devices Segment of the Asbestos Manufacturing Point Source Category. (1974) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Tire and Synthetic Segment of the Rubber Processing Point Source Category, Final. (1974) | | Final |
| Development Document For Effluent Limitations Guidelines And New Source Performance Standards For The Unbleached Kraft And Semichemical Pulp Segment Of The Pulp, Paper, And Paperboard Mills Point Source Category, Final . (1974) | | Final |
| Development Document for Effluent Limitations Guidelines and Pretreatment Standards for the Organic Chemicals and the Plastics and Synthetic Fibers Point Source Category, Volume 1. (1987) | | Final |
| Development Document for Effluent Limitations Guidelines and Standards for Battery Manufacturing Point Source Category, Final, Volume 1. (1984) | | Final |
| Development Document for Effluent Limitations Guidelines and Standards for the Aluminum Forming Point Source Category, Final, Volume II. (1984) | | Final |
| Development Document for Effluent Limitations Guidelines and Standards for the Aluminum Forming Point Source Category, Volume 1, Final. (1984) | | Final |
| Development Document for Effluent Limitations Guidelines and Standards for the Auto and Other Laundries Point Source Category. (1980) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and Standards for the Battery Manufacturing Point Source Category, Volume II. (See EPA 440-1-84-067B). (1984) | | Not Reported |
| Development Document For Effluent Limitations Guidelines And Standards For The Canmaking Subcategory Of The Coil Coating Point Source Category, Final. (See U.S. EPA Headquarters Library Copy #PB84-198647). (1984) | | Final |
| Development Document For Effluent Limitations Guidelines And Standards For The Centralized Waste Treatment Industry, Final, Volume 2. (2000) | | Final |
| Development Document For Effluent Limitations Guidelines And Standards For The Centralized Waste Treatment, Final, Voume 1. (2000) | | Final |
| Development Document for Effluent Limitations Guidelines and Standards for the Coal Mining Point Source Category, Final. (1982) | | Final |
| Development Document For Effluent Limitations Guidelines And Standards For The Coastal Subcategory Of The Oil And Gas Extraction Point Source Category. (1995) | | Not Reported |
| Development Document For Effluent Limitations Guidelines And Standards For The Coil Coating Point Source Category (Canmaking Subcategory), Final (See U.S. EPA Headquarters Library Copy #PB84-198647). (1983) | | Final |
| Development Document For Effluent Limitations Guidelines And Standards For The Coil Coating Point Source Category (Phase 1), Final. (1982) | | Final |
| Development Document For Effluent Limitations Guidelines And Standards For The Coil Coating Point Source Category, Draft. (See Air Docket Copy #A-80-5, II-A-009). (1979) | | Draft |
| Development Document for Effluent Limitations Guidelines and Standards for the Coil Coating Point Source Category. (See EPA 440-1-82-071). (1982) | | Not Reported |
| Development Document For Effluent Limitations Guidelines And Standards For The Coil Coating Point Source Category: Canmaking Subcategory, Proposed (See U.S. EPA Headquarters Library Copy #PB83-198598). (1983) | | Proposed |
| Development Document For Effluent Limitations Guidelines And Standards For The Copper Forming Point Source Category, Final. (See U.S. EPA Headquarters Library Copy No. 84-192459). (1984) | | Final |
| Development Document for Effluent Limitations Guidelines and Standards for the Copper Forming Point Source Category. (See EPA 400-1-82-074B) (1982) | | Not Reported |
| Development Document for Effluent Limitations Guidelines and Standards for the Electrical and Electronic Components Point Source Category, Phase 1. (1983) | | Final |
| Development Document for Effluent Limitations Guidelines and Standards for the Electrical and Electronic Components Point Source Category, Proposed. (1982) | | Proposed |