2010 TRI Public Data Release and Analysis | Region 10 | US EPA

Jump to main content.


2010 TRI Public Data Release and Analysis

Each year, EPA provides an anaylsis of the most recent data from the Toxics Release Inventory (TRI). On this page you will find reports for Alaska, Idaho, Oregon, and Washington. Read the TRI National Analysis

Top 10 TRI Releases by Industry
in the Pacific Northwest in 2010
Rank Industry Total Releases % of Total Releases
1 Metal mining 864,526,796 92.3%
2 Chemical manufacturing 21,151,447 2.3%
3 Hazardous waste/solvent recovery 16,849,838 1.8%
4 Paper manufacturing 11,555,660 1.2%
5 Primary metal manufacturing 7,696,682 0.8%
6 Food/beverages/tobacco 7,598,782 0.8%
7 Electric utilities 4,279,495 0.5%
8 Petroleum and coal products manufacturing 1,013,646 0.1%
9 Fabricated metal product manufacturing 763,402 0.1%
10 Transportation equipment manufacturing 758,555 0.1%

Regional Summary: In 2010, 702 facilities in Alaska, Idaho, Oregon and Washington reported a total of 941 million pounds of toxic chemical releases, an increase of 20%, or 154 million pounds, from 2009. Read the press release

Regional reports:

State-by-state reports:

About the data

  • TRI data reflect the quantities of TRI chemicals that are disposed of, released to the environment, or managed (for example, treated, or recycled). TRI data do not include information about potential public exposure to chemicals.
  • 2010 data is the most current year of data available. TRI reports for 2010 were due on July 1, 2011. 2011 data will be available by December of 2012.
  • Year- to-year data comparisons do not reflect changes in reporting requirements. For example, new chemicals and sectors have been added to TRI throughout the years that change the number of facilities that report and the amounts reported to TRI.
  • No adjustments were made to account for double counting of chemical releases that were disposed of in landfills or other waste management facilities. The facility that generated the chemical and the facility that received the chemical for disposal may have both reported the same amount.
Who Reports to TRI?

A facility is subject to TRI reporting requirements if all of the following three conditions are met:
  1. The facility has 10 or more full-time employee equivalents (20,000 work hours per year);
  2. The facility is classified under a reportable North American Industrial Classification System (NAICS) code;
  3. The facility manufactures, processes, or otherwise uses any of the listed TRI toxic chemicals in amounts greater than the threshold quantities in a calendar year.
Reporting thresholds for most TRI chemicals are 25,000 pounds for chemicals that are manufactured or processed, and 10,000 pounds for chemicals that are otherwise used. A few TRI chemicals that have been identified as Persistent Bioaccumulative and Toxic (PBT) chemicals have lower reporting thresholds.

Manufacturing industry sectors have been reporting their releases since 1987; federal facilities since 1994. In 1998, seven additional industry sectors began reporting their toxic chemical releases to EPA. These sectors are metal mining, coal mining, electricity generation, commercial hazardous waste treatment, solvent recovery, petroleum bulk terminals, and wholesale chemical distributors.

Facilities that report to TRI must submit reports by July 1st of each year. These reports contain information on chemicals released during the prior calendar year.

What is a release?

A TRI “release” is the amount of a TRI toxic chemical that is discharged or emitted by a facility to the environment. There are two major categories of releases: on-site and off-site. On-site releases occur at the facility and are categorized as: 1) air emissions, 2) discharges to surface water, 3) underground injections, or 4) releases to land. Off-site releases are transfers to other facilities for disposal, treatment, or recycling of the toxic chemical.

The actions that facilities take to dispose of or release TRI chemicals are generally regulated under other environmental laws, such as the Clean Air Act, the Clean Water Act, or the Resource Conservation and Recovery Act.

What does this data say about health effects of releases?

Users of TRI information should be aware that TRI data reflects releases and other waste management activities of chemicals, not whether, or to what degree, the public may have been exposed to those chemicals. In the TRI program, facilities report the amount (in pounds) of their chemical releases. To evaluate health risks, release data must be combined with information about chemical toxicity, site-specific conditions, and exposure. TRI information can be combined with additional information and tools to better identify potential health risks from industrial toxics releases. The Risk-Screening Environmental Indicators (RSEI) software tool is one example of a tool that provides health risk information based on TRI data..

What are Persistent Bioaccumulative and Toxic (PBT) chemicals?

PBT chemicals are toxic chemicals that persist in the environment and bioaccumulate in food chains, posing risks to people and the environment. PBT chemicals are a subset of the TRI-listed chemicals that have more strict reporting requirements. Lead, mercury, polychlorinated biphenyl (PCBs), and dioxins are on the PBT chemical list. Learn more about PBTs

Questions? Contact: Learn More


Local Navigation


URL: http://yosemite.epa.gov/R10/OWCM.NSF/TRI/2010data

Jump to main content.